Combi Rake - RV
Fransgård’s RV combi rake is definitely the most powerful model on the market. Fransgård has manufactured this type of rake for more than 30 years, and its uncomplicated and very robust design has made it attractive all over the world. A rake for many purposes such as spreading grass and hay, airing straw swaths or raking the materials. When airing a swath, this is moved 60–70 cm to the side and left in a high, airy, smooth swath.
The RV rake is available in two sizes with a working width of 3.0 m or 3.9 m and two or four wheels respectively as standard. The rakes are equipped with cardan drive transmission between rotors to prevent stoppages. Specially hardened crown wheels/pinions above each rotor, strong steel ring at the base where the spring-loaded tines are fitted. The tines can be moved from raking to spreading position without the use of tools. The centrifugal force presses the springs down into the working position, and if they hit a stone or hole in the ground, they move up instead of down into the soil. During transport, the rake is folded in manually behind the tractor.
|
With the rear crop guards out of the way, the crop can be wide spread evenly
The working height is adjusted by pin holes over the gearboxes and can be fine tuned by the toplink. The RV-390 is supplied with 4 ground wheels, optional extra for the RV-300
|
The tines are lowered into working position by centrifugal force. They can be set for raking or tedding without the use of any tools. The rotor is designed to be solid and robust for a longer service life.
Special hardened crownwheels, pinions and driveline between the rotors allows extreme loading and minimal wear.
|
Find Out More
To find out more about any of our products, arrange a demo or learn about distributor opportunities
For details on Frangård combi rake RV
|
Optional Accessories
|