Levellers
The forge wheels can be easily set and rotated 360°, which allows the possibility of reversing the cutting edge without turning the blade, and ensures optimal levelling.
|
The patented turntable has a modular design and is equipped with Interchangeable wear discs, thus avoiding play In the turntable.
|
The GT-DKH models is supplied with a hydraulic cylinder for setting the horizontal angle to up to +/- 20°. The hydraulic cylinder for left/right offset adjustment is optional on al! models.
|
The blade can be rotated hydraulically up to 230° and used to push earth or snow, as an example. All blades are fitted with reversible cutting edges.
|
The robust suspension and three point hitch offers two options for adjusting the lift arms as well as a top bar bracket with two fixed holes. It also has an oval groove, which allows it to follow the terrain more effectively.
|
Large selection of options are available: Snow blades. edge blades, shock valve with or without accumulator, rubber cutting edge and valve block in case of insufficient outlets on the tractor
|
GT-250DK/GT-275DK/GT-300DK
|
For this leveller no job is too big and ”almost” no job is too little. Whether you are a contractor, farmer or live in the country side, Fransgard’s GT-DK leveller is the right choice. This well thought out product is built in high strength steel and is the only product in the market which has a unique turntable with changeable wear plates.
The hydraulic cylinder is placed and well protected on top of the boom, ensuring the market’s best scraper turn around. Oval mounting of the top link and stepless setting of the wheel, provides af smooth leveling of the road. With hydraulic sideways adjustment and snow wing (extra equipment) the snow can be moved far out. |
|
|
GT-250DKH/GT-275DKH/GT-300DKH
|
This top model within Fransgard’s levellers has the same great advantages as the GT-DK version. However the GT-DKH sets new standards within professional blades and has a unique construction of the 3-point hitch where the horizontal angle is set up to 20° at each side between the boom and the 3-point hitch which has the advantage that it does not overload the lift arms on the tractor.
This blade always levels with the road and it makes an effective ”roof construction” resulting in the water running off the road. The reverse side of the blade has a smart construction which presses excess material down in the road when the driver reverse without turning the blade. A great advantage when arriving to an asphalt road. |
|
|
