Body Swap System - WPS |
Exploit your HAWE running gear to the full with year-round utilisation of different original trailer bodies.
Just two or three different trailer bodies will enable you to utilise your running gear to full capacity. HAWE offers the following bodies:
Just two or three different trailer bodies will enable you to utilise your running gear to full capacity. HAWE offers the following bodies:
- Universal spreader and manure spreader
- Field transfer trailer for grain and seed
- Beet transfer trailer
- Silage transport trailer
- Cargo push-off trailer
- Dumper trailer in a number of different models
Features & Benefits
More efficient and more cost-effective The HAWE body-swap system enables you to exploit your high-quality tandem or tridem running gear to the full. You can choose between running gear with mechanical parabolic suspension or hydro-pneumatic suspension.
Universal and manure spreader bodies, from 15 to 23 cubic metres.
|
Field transfer trailer bodies for grain, from 25 to 38 cubic metres.
|
Beet transfer trailer bodies, capacity of 27 (tandem) and 40 (tridem) cubic metres.
|
HAWE rectangular tubular frame - Twist-Lock system
The HAWE rectangular system with Twist-Lock locking (rectangular tubular frame) has a very low centre of gravity and lays the foundation for flexible transportation of agricultural products using different bodies. All drives for HAWE bodies are built into the body as standard. This reduces the changeover time and prevents faults. The drive shafts and hydraulic hoses are connected by means of quick-release couplings – simple and safe.
The HAWE rectangular system with Twist-Lock locking (rectangular tubular frame) has a very low centre of gravity and lays the foundation for flexible transportation of agricultural products using different bodies. All drives for HAWE bodies are built into the body as standard. This reduces the changeover time and prevents faults. The drive shafts and hydraulic hoses are connected by means of quick-release couplings – simple and safe.
Cost Effective, Large Scale Applications
Cargo push-off trailer body with 40 or 50 cubic metres capacity.
|
Silage transport trailer bodies from 38 to 50 cubic metres capacity.
|
Dumper trailer bodies in different models from 22 to 44 cubic metres.
|
The positive steering system is controlled by a Bowden cable.
Twist-Lock locking system with parking stand holder.
|
Lifting rams to remove and install the different bodies.
Running gear with hydraulic suspension.
|
Hydraulic parking stand and hydraulic drawbar suspension.
Tridem running gear with PTO shaft for the body drives as standard equipment.
|
Short changeover times
Switching between different bodies is quick and easy with the lifting equipment on the carrier vehicle which is part of the standard equipment. On running gear with hydraulic suspension, this is used to change the body.
Switching between different bodies is quick and easy with the lifting equipment on the carrier vehicle which is part of the standard equipment. On running gear with hydraulic suspension, this is used to change the body.
Find Out MoreTo find out more about any of our products, arrange a demo or learn about distributor opportunities
|
For the full technical specification of all HAWE Body Swap Systems
|
Specifications
*) 1st figure = volume with level load (to top of sides), 2nd figure = volume with heaped load up to height of spreader system; L = length, W = width, H = height. Slurry tanker bodies on request. Standard equipment, WPS: braked and steering axles, lower attachment with hydraulic drawbar suspension (except WPS 20 T and WPS 22 T), dual-circuit air brakes with ALB, 4 lifting rams to install and remove bodies, PTO shaft to power individual bodies, Twist-Lock locking system, hydraulic parking stand Standard equipment, bodies: drive shaft with overload safety system, lighting, further standard equipment on request. The HAWE product range is being further developed continually.
We reserve the right to alter technical specifications, prices and models at any time. Illustrations and specifications approximate
We reserve the right to alter technical specifications, prices and models at any time. Illustrations and specifications approximate
Find Out More
To find out more about any of our products, arrange a demo or learn about distributor opportunities