Saphir Tools - Bale Pikes, Grabbers |
Bale Pike BS
The SAPHIR bale pike BS is suitable for the fast transport of round and square bales
Thick-walled tine support pipe with 5 or 7 welded in conical
sleeves (the BS 5 has two external sleeves for optional heavy-duty tines) |
Height adjustable bale support
Tine length 1,100 mm |
Bale Pike Profi BSP
The SAPHIR bale pike Prof BS is suitable for especially high requirements on the transport of round and cuboid bales. The various optional extras make the bale pike to be especially powerful and user-friendly. In addition, higher safety is achieved in road transport by using the foldable tine support pipe.
Thick-walled tine support pipe with 5 - 7 welded-in conical sleeves Tine length 1,000 mm Optional heavy-duty tines 1,250 mm An optional foldable tine support pipe allows the safe road transport With telescopic bale supports up to 1,800 mm Optional with hydraulically extractable bale supports up to max. 2,400 mm (1 x dw. required) |
Bale Lifting Fork BHGThe SAPHIR bale lifting fork serves for the careful transport of round and silo bales in the front- and rear hydraulic system.
|
|
Find Out MoreTo find out more about any of our products, arrange a demo or learn about distributor opportunities
|
Bale Elevator BHS
Using the SAPHIR bale elevator, the lifting height of the host vehicle can be increased by 2,000 mm. The maximum lifting power is 1,000kg. The driver has good visibility through the machine because of the hydraulic cylinders fitted on the outside.
The SAPHIR bale elevators are designed to be particularly stable and warp-resistant. The thick-walled tine support pipe has five welded cone bushes. The shipment contains 3 long large bale tines of a length of 1,100 mm. Depending on the bale size, they can be screwed into the different cone bushes. The bales are held securely by the high stop bracket. Two lifting cylinders are fitted on the outside ensuring good visibility High-quality large-bale tines with length of 1,100 mm from SHW High stop bow provides for safe support of bale |
Foil Wrap Bale Gripper FBZ
The SAPHIR foil wrap bale gripper FBZ is suitable for transporting of round bales with a diameter of 0.90 - 1.60m. Shifting of bales during loading is prevented by the two movable side shafts. The bales cannot be damaged either because of the narrow design of the arms.
The hydraulic cylinder ensures that the bale is held securely. The parking supports are adjustable so that no damage can occur to the turf or the soil during use. Because of the low dead weight and the short design, the foil wrap bale gripper is also suitable for small tractors. Both side shafts movable - therefore bales do not shift Reinforced side shafts without sharp edges Adjustable parking supports |
Cube Bale Gripper QBZ
The SAPHIR cube bale gripper QBZ is suitable for the transport of cubic and silage bales. The clamping bracket and the machine are constructed in such a way that no damage can occur to the wrapped bales.
Both side shafts work independently due to the two double-action hydraulic cylinders. Always the side shaft is moved that is not next to the bale so that the bales do not shift on the ground. Therefore bales can also be stacked closely packed. Cuboid bales can also be incorporated lengthwise because of the long clamping brackets.
|
Round & Cube Bale Gripper RQZ
The SAPHIR RQZ round and cube bale gripper is suitable for transporting round, cuboid and silage bales. The retaining side panels and the machine are constructed in such a way that no damage can occur to the wrapped bales. Both side shafts work independently due to the two double-action hydraulic cylinders. Always the side shaft is moved that is not next to the bale so that the bales do not shift on the ground. Therefore bales can also be stacked closely packed. The retaining side panels can move and are fit firmly against the bale.
|
|
Find Out MoreTo find out more about any of our products, arrange a demo or learn about distributor opportunities
|
POG / POS Lumber Fork
The SAPHIR lumber forks allow easy and safe loading of tree trunks and small-diameter wood in forestry. Serrated edges on the tines of the POG-2 prevent the load from rolling off easily. The curved plate body on the POS -1 and -2 lumber forks are ideally suited to loading in open terrain.
- Clamping range for the version with hydraulic upper gripper
- POG-2: approx. 200 – 1,200 mm
- POS-1 +POS-2: approx. 250 – 1,250 mm
- Forks with serrated edges on both sides (POG-2)
- Curved blade body (POS)
Brush Pile Grab RG / RGO
SAPHIR brush pile grabs RG and RGO are suitable for transporting brushwood and green cuttings in forestry. A particularly robust design enables the user not only to perform simple loading work but also enables it to be used to push together or collect brushwood in impassable terrain or woods.
The screw-in tines enable a variable adjustment of the number of tines on the machine and thus the clear width between the tines. SAPHIR brush pile grabs are available with or without a hydraulic upper gripper. With the design with an upper gripper the brush pile grab has two hydraulic cylinders arranged on the back of the gripper. It protects the cylinders from external influences and the associated damage.
Robust tube tines 1,050 mm (Standard equipment 3 pieces). Optionally, additional tube tines can be added. Very wide opening of 1,550 mm (for design with upper gripper)
The screw-in tines enable a variable adjustment of the number of tines on the machine and thus the clear width between the tines. SAPHIR brush pile grabs are available with or without a hydraulic upper gripper. With the design with an upper gripper the brush pile grab has two hydraulic cylinders arranged on the back of the gripper. It protects the cylinders from external influences and the associated damage.
Robust tube tines 1,050 mm (Standard equipment 3 pieces). Optionally, additional tube tines can be added. Very wide opening of 1,550 mm (for design with upper gripper)
GRZ Green Forage & Brush Pile Pliers
The SAPHIR green forage and brush pile grippers are suitable for transporting brushwood and green cuttings in forestry and in municipal areas. The particularly robust design enables the user not only to perform simple loading work but it can also be used to push together or collect brushwood in impassable terrain or woods.
Heavy-duty tines as standard 800 mm
Optional heavy-duty tines XL S 800 mm round profile 50 mm
Very wide opening approx. 1,550 mm
Heavy-duty tines as standard 800 mm
Optional heavy-duty tines XL S 800 mm round profile 50 mm
Very wide opening approx. 1,550 mm
|
Find Out MoreTo find out more about any of our products, arrange a demo or learn about distributor opportunities
|