
Saphir Tools - Working Platforms |
Maize & Green Forage Pushing Blade MGS
The SAPHIR MGS 300 pusher blade is a simple, rigid blade for attaching to the rear or front hydraulic system. The blade is fitted with a screwed-in Hardox scraper bar that can be replaced if it wears out.
In the heavy version, the SAPHIR MGS 300 S pusher blade can additionally be ballasted by a frame that can be filled with water. To increase the crowd quantity, guiding elements are also installed as standard.
In the heavy version, the SAPHIR MGS 300 S pusher blade can additionally be ballasted by a frame that can be filled with water. To increase the crowd quantity, guiding elements are also installed as standard.
|
|
Maize & Green Forage Pushing Blade Kompakt
The SAPHIR KOMPAKT Maize and Green Forage Pushing Blades feature wide working widths due to an especially powerful dozer performance. Three-part hydraulic folding device enables operation close to the silage heap and guarantees safe road transport. In addition, the close attachment of the robust blade body to the host vehicle ensures a good visibility over the blade and good manoeuvring properties.
|
|
Maize & Green Forage Pushing Blade Kombi 4501/5001
The SAPHIR KOMBI pushing blades are suitable for pulling and pushing. Replaceable Hardox wear strips (500 HB) are ftted on both sides of the stable blade body. The side sections can be retracted and folded out individually backwards or forwards. Because the blade has a particularly stable, robust design, it can be used with system tractors of up to approx. 350 HP (e.g. Claas Xerion).
|
|
|
Find Out MoreTo find out more about any of our products, arrange a demo or learn about distributor opportunities
|
Green Forage Fork GG
The SAPHIR GGT green forage fork is a heavy duty fork for excavating and distributing green cuttings. The particularly heavy duty, screwed-on tines enable large amounts of green cuttings to be collected. The rear part, enclosed by expanded metal, prevents the green cuttings getting onto the loading arms or the quick change frame. Therefore, there is always good visibility when operating the machine.
|
|
GGK Green Forage Fork with Hydraulic Tilt Function
The Green Forage Fork with hydraulic tilt function is used to collect and distribute large quantities of silage. The integrated hydraulic tilt function enables the load to be tilted easily. The rear section, especially closed with expanded metal, prevents the green cuttings from getting into the area of the attachment because of its design. However, this does not block visibility to the tines.
|
|
Silage Roller SW 30 / 30H
SAPHIR silage rollers SW 30 and SW 30H are used to increase the compaction performance of the compaction tractor with grass and maize silage. The welded rings ensure a very high point load and thus optimum penetration in the silo. The machines have twelve welded rings of a height of 160 mm and with a distance of 225 mm.
Roller body and frame can be filled separately with water or other filling agents. Therefore, the ballast in the machines can be adjusted depending on application and towing vehicle capacity. The SW 30H model has a hydraulic displacement device. The displacement range is 700 mm to the right. Thus work can also be performed in corners and walls
Roller body and frame can be filled separately with water or other filling agents. Therefore, the ballast in the machines can be adjusted depending on application and towing vehicle capacity. The SW 30H model has a hydraulic displacement device. The displacement range is 700 mm to the right. Thus work can also be performed in corners and walls
|
|
|
Find Out MoreTo find out more about any of our products, arrange a demo or learn about distributor opportunities
|