Saphir Tools - Working Platforms

< Back to Saphir

Working Platform ABB without EC Pre-Certification

The platform without EC pre-certifcation is suitable for the application in the private area. The large stand space is covered by a closed bottom plate that prevents small mounting parts from falling down. The working platform has a load capacity of 250 kg. Maximum two persons are allowed to be on the working platform at the same time. The high-grade hardwood edge protection is weather-resistant and protects the user from being injured when working with power saws. (Statutory regulations)

• Optional increase of height by 800 mm or 1,200 mm
• Optional protective roof for the application of the working
  platform in closed rooms
• With wooden guard all around the edge for sawing works

• Self-closing and locking access door
  
• Fork tine receptacle as standard
  

Technical safety instructions: Before commissioning a technical safety acceptance test in connection with the host vehicle is required. The host vehicle requirements are as follows: Stability, automatic parallel guide, hose rupture protection and choke valves must be installed. The tip cylinders must be disabled.

---

Working Platform ABB with EC Pre-Certification

The application of working platforms in public and commercial areas has been strictly regulated by the legislature since 2006. Requirements derived from this referring the application of a working platform can be found in the Machinery Directive 2006/42/EC.

Due to its EC pre-certifcation, the SAPHIR working platform meets all necessary requirements to be able to perform the mandatory type test in connection with the individual host vehicle. The required inspections and acceptance tests with positive fitting attachment e.g. Quick change receptacle on host vehicles like e.g. tractors, wheel and telescopic loaders, Up to a fall height of 3.0 m: Technical safety acceptance test at fall heights of 3.0m – 10.0m: EC-type test in connection with the respective host vehicle.

• Sturdy all-steel design
• With wooden guard all-round the edge for sawing works
  
• With self-closing and locking door
• Circular level integrated in the basket as standard
  
• Optional lifting device with added lifting height of 2,000mm
  
• Optional increase of height by 800 mm or 1,200 mm
  
• Optional protective roof for works in closed room
  

Requirements on the host vehicle

• ​Tested stability
• Automatic parallel guide
• Lockable tipping function
• Lifting cylinder with pipe rupture protection units
• Adjustable lifting and lowering speed

• From 7.5m lifting height: Emergency lowering and radio connection
• EC type test for untested unit
• Expert examination for already tested unit
• Information about already tested combinations is available directly from SAPHIR

---

For details on all Saphir products,  including technical specifications, please download the brochure

Download the Brochure (PDF)

---

Find Out More

To find out more about any of our products, arrange a demo or learn about distributor opportunities

Get In Touch

---